TM 5-4220-211-12&P
15A430/18A430 DISASSEMBLY/ASSEMBLY
(4) Remove the cylinder head nuts and pull off the cylinder head. (Figure A-12.)
j.
Cylinder Shield. Completely remove the cylinder shield from the cylinder head using a 4mm allen wrench.
k. Compression Release. After removing its screws with a 4mm allen wrench, pull the compression release
out of the gearcase. (Figure A-14.)
I.
Cylinder. Rotate the flywheel until the piston reaches the bottom of its stroke. Carefully slide the cylinder up
off the studs. (Figure A-15.)
Figure A-13. Cylinder Shield
Figure A-12. Removal of Cylinder Head Nuts
Figure A-14. Compression Release
Figure A-15. Cylinder
A-8