TM 5-4220-231-14&P
b.
Replace
(1)
Wrap teflon tape (Item 19, Appendix
D) around threads
on tee (5) where
hose assembly
will be attached.
(2)
Install the new high pressure
hose
assembly
to the tee (5) by positioning
a wrench
on the nut (6) and turning
nut and hose assembly
(1) clockwise.
(3)
Install hose assembly
(1) to flask valve
(2) by positioning
a wrench on upper
union nut (3) and turning clockwise.
(4)
Apply pressure
to flask. Open flask
valve. Leak-test with nonionic deter-
gent solution (NID), GP (Item 17,
Appendix
D). Correct leaks as neces-
sary.
(5)
Complete
Reentry Control Report and
Log.
4-118
