TM 5-4220-231-14&P
(10) Lubricate
new
O-ring
(5),
M83248/2-116,
with
silicone
compound
(Item 9, Appendix
D), and
install
on
positionable
elbow
(2).
2
Position
and tighten tube (4) to elbow
(2) by turning union nut (3) clockwise.
3,5
Tighten
union nut on other
end of
tube (4).
(11)
Tighten
nut (26) on valve
housing
and the four bolts (30) on the front of
the CRS panel.
Verify all union nuts
are tight.
(12) Apply pressure
to CRS.
Leak-test
with nonionic
detergent
solution (NID)
GP (Item 17, Appendix
D).
Correct
leaks
as necessary.
(13) Complete
Reentry
Control
Report
and Log.
4-98
