TM5-4220-231-14&P
(3)
Remove positionable
union (3) from
regulator by positioning a wrench on
union nut at regulator and turning
counterclockwise.
Remove, cut, and
discard
O-ring (6) which was
between
regulator
and positionable
union.
(4)
Remove positionable union (3) from
filter (1) by positioning wrenches and
turning
union
counterclockwise.
Remove, cut, and discard O-ring (7).
3
(5)
Remove tailpiece connector
(2) from
filter (1) by positioning wrenches on
filter and connector.
Turn connector
counterclockwise.
Remove, cut, and
discard O-rings (5) and (4) which are
under union nut of connector.
5
b.
Replace
(1)
Lubricate new O-ring (7), M83248/2-
908, with silicone compound
(Item 9,
Appendix D). Place new O-ring (7)
on positionable union (3).
(2)
Install union in new filter. Tighten
adjustment
nut on union for proper
installation.
j6
13
1540
4-103
