TM5-4220-231-14&P
b.
Replace
2
(1)
Use an allen wrench to loosen set
screw (2). Remove valve handle (1)
3
from stem of new bleed valve (4).
Remove hex nut (3) from valve.
4
4
(2)
Lubricate
new O-ring (6), M83248/2-
6
904, with silicone compound
(Item 9,
Appendix
D), and install over the
5
threads
on positionable
union (5),
which is installed in cross (7). Install
cross (7) (with attached fittings) to
valve (4) by installing the positionable
union (5) in valve (4).
7
(3)
Position
the valve stem through the
2
hole so the valve stem is exposed
at
3
the front of the back panel.
Loosely
install the hex nut (3) on valve (4).
4
Align tube prior to securing
hex nut.
Install the handle
(1) to the stem,
next to the set screw (2).
4-25
