TM 5-4220-211-12&P
15A430/18A430 DISASSEMBLY/ASSEMBLY
w. Fuel Leak-Off and Supply Line. Install the banjo bolts on the fuel leak-off/supply line at the fuel tank and
fuel injector. Remember to replace both copper washers on each banjo bolt. Route the fuel line as shown.
x. Muffler. Install the muffler and muffler screen using a 14mm wrench. Remember to install the two flat
washers on the outside of the muffler guard. The nut opposite these two requires a 10mm socket.
y. Governor Adjustment. If the governor was removed or taken apart during engine disassembly, adjust the
governor now. Refer to the Fuel/Governing System section for instructions.
Figure A-65. Fuel Leak-off'
and Supply Line
A-23
