TM 5-4220-226-14&P
b. Reassembly
WARNING
Residual lacquer thinner will contaminate diver's air and can
cause injury or death.
NOTE
When installing previously used weights, be sure all traces of
silicone sealant are removed from both the weights and the
mounting hardware.
(1) Remove all traces of silicone sealant using lacquer thinner.
(2) Remove all traces of lacquer thinner using NID solution and soft bristle brush. Wipe clean with lint-
free cloths. Rinse with fresh water; air or blow dry.
(3) Attach alignment sleeve (13) to rear weight (11) with screw (12).
5-13
