TM  S-4220-231-14&P 5-5__ Low   presure (LP) Supply  Isolation, Bleed,    or   Crossover Valve    (DACC)   (VTA)   (DASS). See    Faure     5-4. This   task     covers: Repair INITIAL   SETUP Tools Equipment Conditions General Mechanics Tool   Kit Remove HP   or  LP   Gage Isolation     Valve    (Para. 4-7) O-ring    Installation and    Removal Tool Materials/Parts; Reference Bags, Plastic     (Item   6,  Appendix D) Pam    3-13    Maintenance and    Reentry Control     Procedures Valve,    Ball   13229E4597-5 (DACC    - HP   Supply) (DASS    - Bleed)    -or- 13229E4597-1 (Isolation/Drain) (DACC/VTA)     -or- 13229E4597-6 (Console Pressure) -or- 13229E4597-2 (Red    Diver)    -or- 13229E4697-3 (Green Diver)   -or- 13229E4597-4 (Yellow   Diver)    -or- 13229E4597-7 (Crossover) -or- 13229E4597-8 (DACC    - Bleed)     -or- 13229E4697-9 (CRS    -  Bleed) Grease, Halocarbon (Item    13,   Appendix D) Isopropyl Alcohol    (Item    1 or  2,  Appendix D) O-ring,    M83248/2-010 (2) Rags,    clean,    lint-free     (Item   15,   Appendix D) Repair Kit, 13230E4950 Silicone Compound (Item   9,  Appendix D) Water, Distilled    (Item    10,   Appendix D) Nonionic Detergent Solution (NID)   GP (Item    17,   Appendix D) WARNING Inspect all   seating threads and sliding metal surfaces for   damage that might cause leaks or   faulty operation. Replace any detective items. CAUTION Clean non-metal parts with   clean rags (Item 15,   Appendix D)   or use isopropyl alcohol (Item 1  or    2,   Appendix D)  followed by    a thorough rinse in   clean water (Item 10,   Appendix D).  Any    other solvents may    cause damage to   parts. Change 5 5-19