TM 6-4220-231-14&P
(3)
Remove, cut, and discard O-rings (5) and (6).
b.
Reassembly
Instructions
(1)
Lubricate
new O-ring (6) with silicone compound
(Item 9, Appendix
D), and install on new element
(4).
(2)
Lubricate
new O-ring (5) with silicone compound
(Item 9, Appendix
D), and install on element
base (3).
(3)
Lightly lubricate threads
of new element
(4), 413G-40VN,
with halocarbon
grease
(Item 13,
Appendix D). Install element (4) into element base (3). Tighten snugly by hand.
(4)
Lightly lubricate threads
of element
base (3) with halocarbon
grease
(Item 13, Appendix
D). Install
element
base (3) into housing (2). Tighten securely.
(5)
After assembly,
seal high pressure
filter (1) in a clean plastic bag (Item 5, Appendix
D). Package
in a second
plastic bag (Item 6, Appendix
D) with a tag between
inner and outer bag bearing
the
following information
readable
from the outside:
Part No.:
13229E4599-1
CAGE:
97403
Nomenclature:
High Pressure
Filter
5-6
Change 1
