TM 5-4220-231-14&P
(3)
Loosen tube (10) from positionable
elbow
(9) by positioning
a wrench
on
union
nut
(11)
and
turning
9
counterclockwise.
Remove,
cut,
and
discard
O-ring (15) between
tube
and
elbow.
10
11,15
(4)
Remove
the hex head
screw
(1) and
the center
spacer
(2) from the handle
(4).
Remove
the
three
hex
head
screws
(3) from the handle.
Remove
handle
(4) and bushing
(5). Carefully
remove
the
neoprene
sleeve
(6).
8
Remove
hex
nut
(7) from
regulator
housing
(8).
Retain
all
removed
3
7
parts.
6
4
5
2
(5)
Remove
valve
housing
(8) from the
back of the panel.
Valve
housing
will
have
the filter
(12) and positionable
elbow
(9)
installed
on
it. Remove
positionable
elbow
(9)
from
valve
housing
(8) by positioning
a wrench
12
on
the
elbow
nut
and
turning
counterclockwise.
Remove,
cut, and
discard
O-ring
(16).
9,16
8
(6)
Remove
filter
(12)
from
regulator
housing
(8) by positioning
a wrench
on the
nut of the
positionable
union
12
(13)
and
turning
counterclockwise.
Remove,
cut,
and
discard
O-rings
21
(17),(21).
8
9
,16
124
8
13,17
4-83
