TIMI6-4220-231-14&P
(2)
Install two valve brackets
(16) on the
17
sides of valve (1).
Remove
the
16
appropriate
two
nuts
(18)
and
bolts/studs
(17) from the valve body.
Position
each
bracket,
and replace
bolts and nuts on valve.
Tighten until
1
snug.
16
18
15
14
(3) Position valve (1) with brackets
(16)
from back of panel.
Position
valve
16
stem through
opening,
and line up
mounting
holes
on
panel
and
1
brackets.
Attach valve to panel using
the four bolts (14) and flat washers
(15).
Bolts are secured
in threaded
inserts in each mounting bracket.
16
10
(4) Lubricate new O-ring (9), M83248/2-
111, with silicone
compound
(Item 9,
8,9
Appendix D), and
install in O-ring
groove on upper fitting of valve (1).
(5)
Position and tighten upper tube (10)
by positioning
and
tightening
union
nut (8).
Turn union nut clockwise.
(0-ring (9) is between tube (10) and
valve fitting.)
@@8,9
4-13
