TM 5-4220-225-14
4-31. Umbilical.
This task covers:
Replace
INITIAL SETUP
Materials/Parts
Reference
Umbilical
Para. 4-11 General
Replace.
(1) Diver end. (figure 4-35).
(a)
Remove boot (1) from umbilical (2).
(b)
Loosen connector nuts (3) and disconnect air hose (4) and communications cable
(5) from air
supply whip (5).
(c)
Loosen connector (6) and disconnect communications cable (7) from communications whip (8).
(d)
Remove snap shackle (9) from D-ring (10).
(e)
Connect snap shackle (9) to D-ring (10).
(f)
Connect communications cable (7) to communications whip (8) and tighten connector (6).
(g)
Connect air hose (4) to air whip (5) and tighten connector (3).
(h)
Install boot (1).
4-84
