TM 5-4220-231-14&P
(3)
Remove
snubber
(4) from stem on gage
by turning
snubber
(4) counterclockwise.
Remove,
cut, and discard
O-ring (3), which
is between
gage
stem
and snubber.
3,4
(4)
Remove
mounting
bracket
(2) from rear of
panel
by positioning
a wrench
on the hex
nuts (8) and turning
counterclockwise.
(5)
Remove
gage
(1) from the front of the CRS
panel.
8
2
8
b. Replace
(1)
Ensure
gage
to be installed
is for correct
pressure
range.
3-39
