• Home
  • Download PDF
  • Order CD-ROM
  • Order in Print
Table 2-6.  Postdive Procedures
Postdive Procedures - CONT - TM-5-4220-226-14P_31

TM-5-4220-226-14P MK12 Surface Supported Diving System (SSDS) (NSN 4220-01-097-5674) Manual
Page Navigation
  17    18    19    20    21  22  23    24    25    26    27  
TM 5-4220-226-14&P Table 2-6.  Postdive Procedures - CONT Step Procedure 1.  Doff helmet - continued. b.  Pull nose clearing device fully outward; unfasten chin strap.  Then, grasping the lower opening, thumbs inside to hold head cushion in place, push forward and up on the helmet. c.  After helmet is removed, the umbilical strain relief shackle is disconnected from the harness. d.  Neck dam and yoke is removed by hinging the neck clamp from the yoke and pulling neck dam/neck clamp up and over the head. Let the yoke hinge open and slip off the neck to the rear. 2.  OFF air. a.  Secure the main air supply. b.  Close the emergency air supply cylinder valve. c.  Open the emergency air supply valve and press purge button to bleed air in whip and side block assembly. d.  Obtain a pressure reading for the emergency air cylinder between each dive. 3.  Doff equipment. a.  Remove diver's weight belt. b.  Remove emergency air supply. c.  Remove harness/vest. 2-15









Western Governors University

Privacy Statement
Press Release
Contact

© Copyright Integrated Publishing, Inc.. All Rights Reserved. Design by Strategico.